Inline Flame Arrester

The flame arresters are passive devices that prevent the propagation of flame from the exposed side of a pipe to the protected side by the use of a wound crimped metal ribbon type flame cell element.

This construction produces a series of uniform openings that are carefully constructed to quench the flame by absorbing the heat of the flame.

    Specifications:
  • Size  :   1" (DN25) to 20" (DN500)
  • Design Pressure  :   10 Barg
  • Design Temperature  :   120 Deg C
  • Operating Temperature  :   60 Deg C
  • Rating  :   150# (Higher ratings on request)
  • End Connection  :   Flanged (As per ASME B16.5)
    Features:
  • Rugged Construction
  • High Efficiency and Better Performance
  • The Material Selection of Guiding Components High Efficiency Spring
    Standard Material of Construction:
  • Body  :   A216 Gr. WCB / A351 Gr. CF8 / A351 Gr.
    CF8M / A351 Gr. CF3 / A351 Gr. CF3M
  • Element Plate  :   SS 316
  • Element Mesh  :   SS 321
  • Hood  :   Carbon Steel / Stainless Steel
Finds applications Drain Plugs, Pressure Taps, Misc Fittings, Protective Coatings, Special Features.